Skip to main content

2015 Annual Progress Report

III. Hydrogen Delivery

This section of the 2015 Annual Progress Report for the DOE Hydrogen and Fuel Cells Program focuses on hydrogen delivery.

Hydrogen Delivery Sub-Program Overview, Erika Sutherland, U.S. Department of Energy

  1. Hydrogen Delivery Infrastructure Analysis, Amgad Elgowainy, Argonne National Laboratory
  2. Vessel Design and Fabrication Technology for Stationary High-Pressure Hydrogen Storage, Zhili Feng, Oak Ridge National Laboratory
  3. Hydrogen Embrittlement of Structural Steels, Brian Somerday, Sandia National Laboratories
  4. Fiber-Reinforced Composite Pipelines, George Rawls, Savannah River National Laboratory
  5. Development of High-Pressure Hydrogen Storage Tank for Storage and Gaseous Truck Delivery, Don Baldwin, Hexagon Lincoln
  6. Cryogenically Flexible, Low Permeability H2 Delivery Hose, Jennifer Lalli, NanoSonic
  7. Hydrogen Compression Application of the Linear Motor Reciprocating Compressor (LMRC), Eugene Broerman, Southwest Research Institute
  8. Steel Concrete Composite Vessel for 875 Bar Stationary Hydrogen Storage, Zhili Feng, Oak Ridge National Laboratory
  9. Low-Cost Hydrogen Storage at 875 Bar Using Steel Liner and Steel Wire Wrap, Amit Prakash, WireTough Cylinders
  10. Electrochemical Hydrogen Compressor, Ludwig Lipp, FuelCell Energy, Inc.
  11. Reference Station Design, Danny Terlip, National Renewable Energy Laboratory, and Joe Pratt, Sandia National Laboratories
  12. Hydrogen Fueling Station Pre-Cooling Analysis, Amgad Elgowainy, Argonne National Laboratory
  13. 700-Bar Hydrogen Dispenser Hose Reliability Improvement, Kevin Harrison, National Renewable Energy Laboratory
  14. Magnetocaloric Hydrogen Liquefaction, Jun Cui, Pacific Northwest National Laboratory

Back to Top