Skip to main content

2013 Annual Progress Report

IV. Hydrogen Storage

This section of the 2013 Annual Progress Report for the DOE Hydrogen and Fuel Cells Program focuses on hydrogen storage.

Hydrogen Storage Program Overview, Ned Stetson, U.S. Department of Energy

A. Testing and Analysis

  1. System Analysis of Physical and Materials-Based Hydrogen Storage Options, Rajesh Ahluwalia, Argonne National Laboratory
  2. Hydrogen Storage Cost Analysis, Brian James, Strategic Analysis, Inc.
  3. Best Practices for Characterizing Engineering Properties of Hydrogen Storage Materials, Karl Gross, H2 Technology Consulting LLC

Back to Top

B. Engineering—Hydrogen Storage Engineering Center of Excellence (HSECoE)

  1. Hydrogen Storage Engineering Center of Excellence, Don Anton, Savannah River National Laboratory
  2. Systems Engineering of Chemical Hydrogen Storage, Pressure Vessel, and Balance of Plant for Onboard Hydrogen Storage, Jamie Holladay, Pacific Northwest National Laboratory
  3. Advancement of Systems Designs and Key Engineering Technologies for Materials-Based Hydrogen Storage, Bart van Hassel, United Technologies Research Center
  4. Chemical Hydride Rate Modeling, Validation, and System Demonstration, Troy Semelsberger, Los Alamos National Laboratory
  5. System Design, Analysis, Modeling, and Media Engineering Properties for Hydrogen Energy Storage, Matthew Thornton, National Renewable Energy Laboratory
  6. Thermal Management of Onboard Cryogenic Hydrogen Storage Systems, Mei Cai, General Motors Company
  7. Ford/BASF-SE/UM Activities in Support of the Hydrogen Storage Engineering Center of Excellence, Michael Veenstra, Ford Motor Company
  8. Microscale Enhancement of Heat and Mass Transfer for Hydrogen Energy Storage, Kevin Drost, Oregon State University
  9. Development of Improved Composite Pressure Vessels for Hydrogen Storage, Norman Newhouse, Hexagon Lincoln

Back to Top

C. Materials—Sorption

  1. Hydrogen Sorbent Measurement Qualification and Characterization, Phil Parilla, National Renewable Energy Laboratory
  2. Room Temperature Hydrogen Storage in Nano-Confined Liquids, John Vajo, HRL Laboratories, LLC
  3. Hydrogen Storage in Metal-Organic Frameworks, Jeffrey Long, Lawrence Berkeley National Laboratory
  4. The Quantum Effects of Pore Structure on Hydrogen Adsorption, Raina Olsen, Oak Ridge National Laboratory
  5. Metallation of Metal-Organic Frameworks: En Route to Ambient Temperature Storage of Molecular Hydrogen, Joseph Mondloch, Northwestern University
  6. Weak Chemisorption Validation, Thomas Gennett, National Renewable Energy Laboratory
  7. Hydrogen Trapping through Designer Hydrogen Spillover Molecules with Reversible Temperature and Pressure-Induced Switching, Angela Lueking, Pennsylvania State University

Back to Top

D. Materials—Metal Hydrides

  1. Design of Novel Multi-Component Metal Hydride-Based Mixtures for Hydrogen Storage, Christopher Wolverton, Northwestern University
  2. Hydrogen Storage Materials for Fuel Cell-Powered Vehicles, Andrew Goudy, Delaware State University
  3. Neutron Characterization in Support of the DOE Hydrogen Storage Sub-Program, Terry Udovic, National Institute of Standards and Technology

Back to Top

E. Materials—Chemical

  1. Fluid Phase Chemical Hydrogen Storage Materials, Benjamin Davis, Los Alamos National Laboratory
  2. Development of a Practical Hydrogen Storage System Based on Liquid Organic Hydrogen Carriers and a Homogeneous Catalyst, Craig Jensen, Hawaii Hydrogen Carriers, LLC
  3. Novel Carbon(C)-Boron(B)-Nitrogen(N)-Containing H2 Storage Materials, Shih-Yuan Liu, University of Oregon
  4. Aluminum Hydride: The Organometallic Approach, Jim Wegrzyn, Brookhaven National Laboratory
  5. Electrochemical Reversible Formation of Alane, Ragaiy Zidan, Savannah River National Laboratory

Back to Top

F. Advanced Tanks

  1. Lifecycle Verification of Polymeric Storage Tank Liners, Barton Smith, Oak Ridge National Laboratory
  2. Melt Processable PAN Precursor for High-Strength, Low-Cost Carbon Fibers, Bob Norris, Oak Ridge National Laboratory
  3. Development of Low-Cost, High-Strength Commercial Textile Precursor (PAN-MA), Dave Warren, Oak Ridge National Laboratory
  4. Synergistically Enhanced Materials and Design Parameters for Reducing the Cost of Hydrogen Storage Tanks, Kevin Simmons, Pacific Northwest National Laboratory

Back to Top