Skip to main content

2017 Annual Merit Review Proceedings

Hydrogen Production and Delivery

View presentations and posters from the Hydrogen Production and Delivery session at the Annual Merit Review in June 2017.

Hydrogen Production and Delivery Overview, Eric Miller, U.S. Department of Energy

Hydrogen Production and Delivery Presentations

  1. Hydrogen Delivery
  2. Electrolysis
  3. Biological
  4. Hydrogen Production Analysis
  5. High-Temperature Thermochemical
  6. Photoelectrochemical

A. Hydrogen Delivery

  1. Hydrogen Refueling Analysis of Heavy-Duty Fuel Cell Vehicle Fleet, Amgad Elgowainy, Argonne National Laboratory
  2. Fatigue Performance of High-Strength Pipeline Steels and Their Welds in Hydrogen Gas Service, Joe Ronevich, Sandia National Laboratories
  3. 700 bar Hydrogen Dispenser Hose Reliability Improvement, Kevin Harrison, National Renewable Energy Laboratory
  4. Hydrogen Compression Application of the Linear Motor Reciprocating Compressor (LMRC), Eugene Broerman, Southwest Research Institute
  5. Low-Cost Hydrogen Storage at 875 bar Using Steel Liner and Steel Wire Wrap, Amit Prakash, Wiretough Cylinders
  6. Improved Hydrogen Liquefaction through Heisenberg Vortex Separation of Para- and Ortho-Hydrogen, Christopher Ainscough, National Renewable Energy Laboratory
  7. Magnetocaloric Hydrogen Liquefaction, Jamie Holladay, Pacific Northwest National Laboratory
  8. H2FIRST—Consolidation, Danny Terlip, National Renewable Energy Laboratory
  9. Liquid Hydrogen Infrastructure Analysis, Guillaume Petitpas, Lawrence Livermore National Laboratory
  10. Electrochemical Compression, Monjid Hamdan, Giner, Inc.
  11. Hybrid Electrochemical-Metal Hydride Compression, Scott Greenway, Greenway Energy, Inc.
  12. Metal Hydride Compression, Terry Johnson, Sandia National Laboratories
  13. Reference Station Design, Phase II, Ethan Hecht, Sandia National Laboratories
  14. Dispenser Reliability, Christopher Ainscough, National Renewable Energy Laboratory
  15. Advancing Hydrogen Dispenser Technology by Using Innovative Intelligent Networks, Darryl Pollica, Ivys Inc.

Back to Top

B. Electrolysis

  1. Renewable Electrolysis Integrated System Development and Testing, Mike Peters, National Renewable Energy Laboratory
  2. High-Performance, Long-Lifetime Catalysts for Proton Exchange Membrane Electrolysis, Hui Xu, Giner, Inc.
  3. Solid Oxide Based Electrolysis and Stack Technology with Ultra-High Electrolysis Current Density (>3A/cm2) and Efficiency, Randy Petri, FuelCell Energy
  4. High-Temperature Alkaline Water Electrolysis, Hui Xu, Giner, Inc.
  5. Multi-Scale Ordered Cell Structure for Cost-Effective Production of Hydrogen by High-Temperature Water Splitting (HTWS), Elango Elangovan, Ceramatec
  6. Economic Production of Hydrogen through Development of Novel, High Efficiency Electrocatalysts for Alkaline Membrane Electrolysis, Katherine Ayers, Proton OnSite
  7. HydroGEN: A Consortium on Advanced Water Splitting Materials, Huyen Dinh, National Renewable Energy Laboratory

Back to Top

C. Biological

  1. Biomass to Hydrogen (B2H2), Pin-Ching Maness, National Renewable Energy Laboratory
  2. Sweet Hydrogen: High-Yield Production of Hydrogen from Biomass Sugars Catalyzed by in vitro Synthetic Biosystems, Y-H Percival Zhang, Virginia Tech
  3. Novel Hybrid Microbial Electrochemical System for Efficient Hydrogen Generation from Biomass, Hong Liu, Oregon State University

Back to Top

D. Hydrogen Production Analysis

  1. Analysis of Advanced H2 Production and Delivery Pathways, Brian James, Strategic Analysis, Inc.

Back to Top

E. High-Temperature Thermochemical

  1. High-Efficiency Solar Thermochemical Reactor for Hydrogen Production, Tony McDaniel, Sandia National Laboratories
  2. Flowing Particle Bed Solarthermal RedOx Process to Split Water, Al Weimer, University of Colorado, Boulder

Back to Top

F. Photoelectrochemical

  1. High-Efficiency Tandem Absorbers for Economical Solar Hydrogen Production, Todd Deutsch, National Renewable Energy Laboratory
  2. Wide Bandgap Chalcopyrite Photoelectrodes for Direct Solar Water Splitting, Nicolas Gaillard, University of Hawaii
  3. Tandem Particle-Slurry Batch Reactors for Solar Water Splitting, Shane Ardo, University of California, Irvine

Back to Top

Hydrogen Production and Delivery Posters

  1. Electrolysis
  2. Biological
  3. High-Temperature Thermochemical
  4. Photoelectrochemical

A. Electrolysis

  1. High-Performance Platinum Group Metal-Free Membrane Electrode Assemblies through Control of Interfacial Processes, Katherine Ayers, Proton OnSite

Back to Top

B. Biological

  1. Monolithic Piston-Type Reactor for Hydrogen Production through Rapid Swing of Reforming/Combustion Reactions, Kenneth Rappé, Pacific Northwest National Laboratory

Back to Top

C. High-Temperature Thermochemical

  1. Accelerated Discovery of Advanced RedOx Materials for STWS to Produce Renewable Hydrogen, Charles Musgrave, University of Colorado, Boulder

Back to Top

D. Photoelectrochemical

  1. New Metal Oxides for Efficient Hydrogen Production via Solar Water Splitting, Yanfa Yan, University of Toledo
  2. NSF/DOE Solar Hydrogen Fuel: Engineering Surfaces, Interfaces, and Bulk Materials for Unassisted Solar Photoelectrochemical (PEC) Water Splitting, Tom Jaramillo, Stanford University
  3. Tunable Photoanode-Photocathode-Catalyst Interface Systems for Efficient Solar Water Splitting, G. Charles Dismukes, Rutgers University

Back to Top

To locate posters and presentations from other meeting sessions, go to the main page of the 2017 Annual Merit Review Proceedings.